高速光纖激光打標機

THM-10S系列高速光纖激光打標機是采用國際最先進的光纖激光器研制成的新一代光纖激光打標機系統，整機體積小巧，輸出光束質量好，標刻精度極高，深度好。采用風冷方式冷卻，10萬小時免維修運行。廣泛應用于對光潔度、精細度高的標記領域，如鋼、銅、鋁、金銀等大部分金屬、塑料、陶瓷、電子器材，適用于鐘表、模具、位圖打標、包裝、醫療、煙草、潔具、食品、電子、禮品等行業，是高速精密標刻的的最佳選擇。

技術參數：
設備型號 THM-10S
激光介質摻鐿光纖
激光功率 10W
激光波長 1055-1070nm
重復頻率 20-100KHZ
打標幅面 150×150mm
標刻線速 ≤12000mm/s
最小線寬 0.012mm
最小字符 0.1mm
重復精度 ±0.003mm
整機最大功率 400W
供電電源 AC220V/50HZ
工作環境： 溫度5~28℃,濕度<80%
外型尺寸（長×寬×高） 900×720×1250mm
重量 100KG

選配器件：
1、旋轉頭 D80 D50
2、雕刻范圍（mm） 70*70 110*110 150*150

光纖打標機優點：
1、優質的光束質量：光纖激光器的光斑和發散角比傳統激光器的更小，標記精密度高。

2、使用成本低廉：電光轉換率高，整機耗電不到500W，是燈泵浦激光器的1/10。
3、免維護操作：激光器無需進行任何維護，也不用調節和清潔鏡片。
4、使用壽命長：使用激光二極管做為泵浦源，其工作時間長達10萬小時。
5、體積小，結構緊湊封閉，采用光纖傳輸，在較高溫度，濕度等惡劣環境下也能正常工作。
6、加工速度快：是傳統激光打標機的2到3倍。

應用領域：應用于對深度、光滑度、精細度要求較高的領域，首飾、飾品打標、紙品包裝打標、汽車配件打標、電子五金打標、衛生潔具打標、玻璃制品打標、位圖打標、可在金屬，塑料等精美的圖案。

fiber laser marking machine

THM-10S series high-speed fiber laser marking machine adopts the internationally fiber laser for the development of a new generation of fiber laser marking system. It has many advantages as follows: machine is smart, the quality of output beam is good, the accuracy of marking is very high and the depth is nice. It can be maintenance-free operation for a long time with using air-cooling method.. It is widely used in mark field of smooth finish and high precision, such as steel, copper, aluminum, gold and silver, and most other metals, plastics, ceramics, electronic equipment. And be suitable for watches and clocks, mold, bitmap marking, packaging, health care, tobacco, Sanitary Ware, food, electronics, gifts and other industries It is the best choice of high-speed precision marking.

technical parameters:
Model THM-10S
Laser ytterbium-doped fiber
Laser Power 10W
Laser Wavelength 1055-1070nm
Laser Repetition Rate 20-100KHZ
Marking Area 110×110mm
Marking Wire-speed ≤12000mm/s
The Min. line Width 0.012mm
The Smallest Characters 0.1mm
The Repeat Accuracy ±0.003mm
The Whole Power 400W/500W
Power Supply AC220V/50HZ
Work environment： Temperature:5~28℃, humidity<80%
Dimension(Length×Width×Height ) 900×720×1250mm
Weight 100KG

Option device:
1. Rotary fixture D80 D50
2. Marking Area(mm) 70*70 110*110 150*150

Advantage of fiber laser marking machine:
1. Excellent beam quality: The laser spot and divergence angle of fiber laser marking machine is smaller than

traditional marking machine, marking more precision

2. Low use-cost: high turnover ratio between electricity and laser, the whole machine power consumption is less than 500W, which is 1/10 of light pumping source laser.

3. Maintenance-free Operation: There is no need of any maintenance for laser, or to adjust /clean the lens.

4. Long working life: using laser diode as pumping source, the working hours can reach as long as 100,000 hours.

5. Small machine body can be used in severe environment: using fiber to realize laser transport and the structure is compact, which makes possible to work under severe environment such as vibration, high-temperature.

6. High processing speed: 2-3 times of the traditional laser marking machine.

Applied Field :Widely used in the field of high requirements of depth, Smoothness and precision, such as jewelry, decoration, paper packing, auto parts, electronic hardware, sanitary, glass and bitmap. It can also works on metal and plastic surface.