功能介紹
可進行各種各種高檔PVC、熱轉印及單面木皮的表面貼飾。
此機加工的各種PVC工件粘接牢固，不反彈翹邊。溝槽線條清晰到位。
General Introduction
It is used to work various high-profile PVC, hot transfer and single veneer.
The products are of high-quality, and will not peel off. The line and groove is clear.
設備特性
1、液壓系統關鍵部件采用進口配件，安全可靠技術
2、使用德國原裝進口真空泵，馬力強勁，故障率低。
3、操作系統采用PLC控制，大屏幕人機界面，控制方便，技術先進、自動化程序高。
4、數顯電源、電壓顯示，清晰直觀。采用微電腦溫度控制儀器，精確控制溫度。Features
1、Key components in the hydraulic pressure system are imported, which is safe and reliable.
2、Vacuum pump is imported from Germany; its horsepower is strong and it seldom breaks down.
3、The operation system chooses the imported PLC control equipment. The large man-machine screen is used. The machine is easy to control, and the technology advanced. The automatic degree is very high, too.
4、Number display current and voltage display ate easy to see. The micro computer control equipment is adopted to control the temperature exactly.
技術參數(Technical Specifications)
外形尺寸（Exterior size）：9930mm*2230mm*2150mm
工作臺尺（Working plate size）:2300mm*1270mm(內徑inner size)
最大加工高度(Maximum height of the work piece)：50mm
額定工作壓力(Raying working pressure)：正壓(Positive pressure)≤0.6Mpa負壓(Negative pressure)≥-0.095Mpa
總功率(General power)：49.5kW
實際耗電(Actual power consumption)：約(about)16kW
整機重量(General power)：14T