1、適用于鋁合金門窗料、幕墻料的切割，亦可用與塑料型材的切割下料。
2、采用硬質合金鋸片，加工精度高、壽命長。
3、兩鋸頭可同時進行切割，亦可單獨切割。
4、兩鋸片可在45°~ 90°之間任意切割。
5、氣液阻尼缸實現進給調速均勻、運動平穩。
6、自動開合防護罩，操作安全方便。
7、采用數字顯示系統，使加工的型材長度精確顯示在屏幕上。

.Applicable for cutting aluminum alloy door and window materials, curtain wall materials and plastic shaping articles.
2. Made by hard alloy saw blades with high precision and long service life.
3. Two saw heads can cut independently or at the same time.
4. Two saw blades can cut with an angle between 45°and 90°
5. Gas-liquid damping cylinder feeds stably in an average speed.
6. Automatic switching protective shields, easy and safe.
7. Digital display system is adopted to display the length of processed materials.

主要技術參數:
輸入電源……………………380V 50Hz
工作氣壓……………………0.6-0.8Mpa
切削最大長度……………………4500mm
切割角度……………………45°- 90 °
機床重量……………………1500kg
馬達功率……………………2×2.2kw
切削最小長度……………………400mm
切削型材（寬×高）……………………235×140mm
鋸片尺寸……………………Φ500×Φ30×120T
外形尺寸……………5750*1300*1500mm