|
公司基本資料信息
|
||||||||||||||||||||||||||||||||
1、工作幅面40*60cm
2、重量 45kg
3、功率 2w
本機可將各種燙畫經熱轉印燙在棉,麻,化纖等織物上,還可進行絲網印刷,膠漿,發(fā)泡等工藝熱處理,還可將彩色色標,人像照片,風景圖案等烤制在瓷板,金屬板上,特別適合制作獎牌,紀念證牌,墓碑像,文化衫等,經濟又實用.
This machine can be by the sublimation of plate backing in cotton, hemp, iron on the fabric such as chemical, but also for screen printing, rubber paste, foaming process such as heat treatment, still can will color color code, portrait, landscape design to wait baked photos in porcelain plate, sheet metal, especially suitable for making MEDALS, memorial ZhengPai, tombstone, t-shirts, etc, as economic and practical
操作過程 (Operation process)
• 注意:整機必須有合適牢靠的保護地線.
• 手插電源,打開電源開關,電源指示燈隨即亮.
• 將調溫器調校至所需溫度,待溫度到達設定溫度后,調溫器上部的指示滅掉,此時即可開始工作.
• 將時間控制器調校至所需時間.
• 將轉印物品平放在下燙板上,再放上熱轉印紙(注意紙的正反面),將手柄用力向下壓,直至終點.
Note: the machine must have appropriate sturdy protection landlines.
• hands in power, turn on the power switch, the power indicator light immediately.
• will thermostat adjustments to the necessary to set the temperature reached the temperature, temperature, thermostat, upper instructions can begin destruction at work.
• will time controller school to the required time.
• put items next hot plate pig, then add the sublimation of paper (note paper guangzhou2005), will handle a ruler to forcibly, until the end.
注意事項 (note)
•當指示燙印的時間控制器時間到時,蜂鳴器響,即將手柄向上提起至原位.
• 成功的燙印需要有正確的時間,溫度及壓力的互相配合,衣物的厚度和材料及燙畫紙的種類都影響到燙印的效果.
產品適合燙于服裝、廣告用品等?？蓪⑥D印到自己所需要燙印的物品上.質量保證,
When instructions stamping time controller by buzzer rang, time, will handle up mention to in situ.
• successful stamping need to have the right time, temperature and pressure cooperate with each other, clothing and thickness of materials and plate backing paper kinds affect decoration effect.
Products suitable for hot in clothing, advertising products, etc. Can put to own needs of stamping quality assurance, goods.
點擊圖片查看原圖
