產品品牌：鑫運

產品型號：6M

分步固定式切割機Fixed step cutting machine工作原理Working Principle:翻轉吊具把模具空中翻90度后脫模把坯體連同模具側板放置在切割小車后，切割小車通過電機啟動自身行走緩緩地通過縱切裝置縱切完成后，切割小車再行走至橫切裝置中央位置停止后，橫切裝置啟動，橫切架自上而下垂直降落，對坯體進行橫向切割，切割直至上升復位Turning over sling turns the mould with 90 degree and demoulds it, the cake together with the side board of the mould are placed on the cutting cart.  Open the motor, the cutting cart moves slowly through the vertical cutting device to complete the cutting. Then it moves to the middle of the cutting device and stops there, the cross cutting device is started at this moment. The cutting frame drops vertically, then after cutting the cake horizontally, cut the cakes from the horizontal side it will return to its original position. 主要技術參數Main technical parameter:

序號Item	名稱Name	單位Unit	指標Index	備注Remarks
1	生產能力Capacity	1000m³/year	10-30	Annual output
2	坯體尺寸Size of the cake	M	6*1.2*0.6	Net
3	切割模數Cutting cycle	mm	5/10	Vertical cutting/cross cutting
4	切割精度Cutting precision	mm	±3±1.5±1.5	Length, width, height
5	生產周期Production cycle	Min/mould	6
6	切割主機質量Quality of the master cutting machine	t	18	Vertical cutting/cross cutting
7	切割主機裝機容量Installed capacity of the master cutting machine	kw	12.9	Including hydraulic station

分布固定式切割機專業生產廠家鄭州鑫運重工，竭誠為廣大客戶提供整套加氣混凝土設備生產線設計方案及售后服務，歡迎來電咨詢相關參數及價格。

分布固定式切割機：86-0371-64965111  64966899
傳真：86-0371-64968680
網址：www.xyzg888.com
      www.xyzg999.com
      www.xyzg777.com
      www.xyzg666.com
郵編：450013
郵箱：xyzgjx@126.com
分布固定式切割機專業生產廠家鄭州鑫運重工歡迎廣大客戶蒞臨實地（地址：鄭州市鄭上路1號）參觀考察。